[j-nsp] MPLS for management VPN question
Jeff Meyers
Jeff.Meyers at gmx.net
Thu Jun 4 07:13:30 EDT 2009
Truman Boyes schrieb:
Hi,
thanks for your answer so far.
> You then need to define a route-distinguisher, and route targets (or
> simply vrf-target under the VRF) to import/export the routes for this
> VPN from other PEs.
Can you provide an example for that? That would be a L3VPN, right? Why
would I need any routes to be known on the router? Basically I only need
192.168.0.0/16 to be the management subnet globally without any default
gateways.
> Later on you might want to connect some of your NMS/OSS systems into the
> VRF so they can reach the the devices on the management VPN.
So I simply add the devices to the vlan 100 on the existing ae Link with
.1q tagged vlans? No special encapsulation needed on juniper side?
Thanks,
Jeff
More information about the juniper-nsp
mailing list