[j-nsp] MPLS EXP bit marking question

[masood at nexlinx.net.pk]

With the current hardware/software arch, I'm afraid you can't do that (I'm
not sure though).

Regards,
Masood


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Li Zhu
Sent: Sunday, June 07, 2009 11:46 PM
To: masood at nexlinx.net.pk
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MPLS EXP bit marking question

Masood, Nugroho

Thank you for the reply. I agree with both of you that rewrite takes effect
on both inner and outer mpls label. My next question is:

what if I want to mark inner and outer MPLS label differently? Say I want
mark the inner exp with 5 and outer exp with 6? Is it possible to achieve
this?

Thanks,

Li

On Sun, Jun 7, 2009 at 4:10 PM, <masood at nexlinx.net.pk> wrote:

> the rewrite-rule will take effect on both tags and all the labels in label
> stack.
>
> Regards,
> Masood
>
> > All,
> >
> > There is a network like CE --- PE --- P. The PE is M320. Traffic is from
> > CE
> > to P. The traffic out of CE is native IP, after it reaches and gets out
> PE
> > (then to P), it is double-tagged with MPLS lable. There is a exp
> > rewrite-rule applied on PE link to P router. My questions is
> > will the rewrite-rule take effect on both tags or only the outer tag?
> >
> > Thanks,
> >
> > Li
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp