[j-nsp] syslog rsmon jtree problem

[Juniper Iber-x]

Nicolaj Kamensek wrote:
> Stefan Fouant schrieb:
>
>> Could it be that it's not a memory error per se, but rather you just
>> need more memory.  The error message you are getting seems to indicate
>> that you are running out of SSRAM on your SSB for storage of the
>> forwarding-table (jtree).
>
> I agree. However, 8MB of SSRAM can handle those 270k routes perfectly
> fine. In fact the actual limit seems to be somewhere around 500-550k
> routes.
>
> Do you have some more routing-instances running on your system?
>
>
> Regards,
> Nico
>
>

"You have a logical router with a full table.  You say so in your
original post.  Did I misunderstand?  Paste the output of the below
command:

user at junos <https://puck.nether.net/mailman/listinfo/juniper-nsp>> show pfe route summary"



Hellos,

This is what command showing:

IPv4 Route Tables:
Index         Routes     Size(b)
--------  ----------  ----------
Default       275509    19548772
1                  6         422
2             275455    19544884

MPLS Route Tables:
Index         Routes     Size(b)
--------  ----------  ----------
Default            1          68
2                  1          68

IPV6 Route Tables:
Index         Routes     Size(b)
--------  ----------  ----------
Default         1550      112994
1                  4         305
2               1532      111482

Thanks in advance