[j-nsp] l2-circuit from Juniper m40 to a cisco

[Dinesh]

just attaching the interface config..

fe-5/2/2 {
        vlan-tagging;
        encapsulation vlan-ccc;
        fastether-options {
            loopback;
        }
        unit 100 {
            encapsulation vlan-ccc;
            vlan-id 600;
        }
    }


On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <dineshbs123 at gmail.com> wrote:

> Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
> see cisco fine... but i get this error on m40 ...
>
>
>  neighbor 2.2.2.2 {
>     interface fe-5/2/2.600 {
>         virtual-circuit-id 999;
>     }
> }
>
> 10 16:52:06.831491  [l2ckt_intf_change_process] Change processing for intf
> fe-5/2/2.600:
> Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update  vc
> 2.2.2.2:999 --> interface not present
> Mar 10 16:54:53.521672  [l2ckt_intf_change_process] Change processing for
> intf fe-5/2/2.600:
> Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update  vc
> 2.2.2.2:999 --> interface not present
> Mar 10 16:54:54.711437  [l2ckt_intf_change_process] Change processing for
> intf fe-5/2/2.600:
> Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update  vc
> 2.2.2.2:999 --> interface not present
>
>
>