[j-nsp] l2-circuit from Juniper m40 to a cisco

[Nilesh Khambal]

I think its misconfig.

You can configured unit 100 under fe-5/2/2 but in L2CKT you have 
configured unit 600.

Thanks,
Nilesh

Dinesh wrote:
> just attaching the interface config..
> 
> fe-5/2/2 {
>         vlan-tagging;
>         encapsulation vlan-ccc;
>         fastether-options {
>             loopback;
>         }
>         unit 100 {
>             encapsulation vlan-ccc;
>             vlan-id 600;
>         }
>     }
> 
> 
> On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <dineshbs123 at gmail.com> wrote:
> 
>> Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
>> see cisco fine... but i get this error on m40 ...
>>
>>
>>  neighbor 2.2.2.2 {
>>     interface fe-5/2/2.600 {
>>         virtual-circuit-id 999;
>>     }
>> }
>>
>> 10 16:52:06.831491  [l2ckt_intf_change_process] Change processing for intf
>> fe-5/2/2.600:
>> Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update  vc
>> 2.2.2.2:999 --> interface not present
>> Mar 10 16:54:53.521672  [l2ckt_intf_change_process] Change processing for
>> intf fe-5/2/2.600:
>> Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update  vc
>> 2.2.2.2:999 --> interface not present
>> Mar 10 16:54:54.711437  [l2ckt_intf_change_process] Change processing for
>> intf fe-5/2/2.600:
>> Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update  vc
>> 2.2.2.2:999 --> interface not present
>>
>>
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>