[j-nsp] l2-circuit from Juniper m40 to a cisco

Arda Balkanay ardabalkanay at gmail.com
Wed Mar 11 03:02:37 EDT 2009


You have configured interface fe-5/2/2.100 but used fe-5/2/2.600 at
l2circuit that's why you get " Mar 10 16:52:06.832065 [l2ckt_vc_update]
Failure to create/update  vc 2.2.2.2:999 --> interface not present" error.
It says "interface does not exist" ...


On Wed, Mar 11, 2009 at 2:14 AM, Dinesh <dineshbs123 at gmail.com> wrote:

> just attaching the interface config..
>
> fe-5/2/2 {
>        vlan-tagging;
>        encapsulation vlan-ccc;
>        fastether-options {
>            loopback;
>        }
>        unit 100 {
>            encapsulation vlan-ccc;
>            vlan-id 600;
>         }
>    }
>
>
> On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <dineshbs123 at gmail.com> wrote:
>
> > Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
> > see cisco fine... but i get this error on m40 ...
> >
> >
> >  neighbor 2.2.2.2 {
> >     interface fe-5/2/2.600 {
> >         virtual-circuit-id 999;
> >     }
> > }
> >
> > 10 16:52:06.831491  [l2ckt_intf_change_process] Change processing for
> intf
> > fe-5/2/2.600:
> > Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update  vc
> > 2.2.2.2:999 --> interface not present
> > Mar 10 16:54:53.521672  [l2ckt_intf_change_process] Change processing for
> > intf fe-5/2/2.600:
> > Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update  vc
> > 2.2.2.2:999 --> interface not present
> > Mar 10 16:54:54.711437  [l2ckt_intf_change_process] Change processing for
> > intf fe-5/2/2.600:
> > Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update  vc
> > 2.2.2.2:999 --> interface not present
> >
> >
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list