[j-nsp] l2-circuit from Juniper m40 to a cisco

[Dinesh]

Thank you, this fixed the issue /
On Wed, Mar 11, 2009 at 12:02 AM, Arda Balkanay <ardabalkanay at gmail.com>wrote:

> You have configured interface fe-5/2/2.100 but used fe-5/2/2.600 at
> l2circuit that's why you get " Mar 10 16:52:06.832065 [l2ckt_vc_update]
> Failure to create/update  vc 2.2.2.2:999 --> interface not present" error.
> It says "interface does not exist" ...
>
>
>   On Wed, Mar 11, 2009 at 2:14 AM, Dinesh <dineshbs123 at gmail.com> wrote:
>
>>  just attaching the interface config..
>>
>> fe-5/2/2 {
>>        vlan-tagging;
>>        encapsulation vlan-ccc;
>>        fastether-options {
>>            loopback;
>>        }
>>        unit 100 {
>>            encapsulation vlan-ccc;
>>            vlan-id 600;
>>           }
>>    }
>>
>>
>> On Tue, Mar 10, 2009 at 4:57 PM, Dinesh <dineshbs123 at gmail.com> wrote:
>>
>> > Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i
>> > see cisco fine... but i get this error on m40 ...
>> >
>> >
>> >  neighbor 2.2.2.2 {
>> >     interface fe-5/2/2.600 {
>> >         virtual-circuit-id 999;
>> >     }
>> > }
>> >
>> > 10 16:52:06.831491  [l2ckt_intf_change_process] Change processing for
>> intf
>> > fe-5/2/2.600:
>> > Mar 10 16:52:06.832065 [l2ckt_vc_update] Failure to create/update  vc
>> > 2.2.2.2:999 --> interface not present
>> > Mar 10 16:54:53.521672  [l2ckt_intf_change_process] Change processing
>> for
>> > intf fe-5/2/2.600:
>> > Mar 10 16:54:53.522137 [l2ckt_vc_update] Failure to create/update  vc
>> > 2.2.2.2:999 --> interface not present
>> > Mar 10 16:54:54.711437  [l2ckt_intf_change_process] Change processing
>> for
>> > intf fe-5/2/2.600:
>> > Mar 10 16:54:54.711864 [l2ckt_vc_update] Failure to create/update  vc
>> > 2.2.2.2:999 --> interface not present
>> >
>> >
>> >
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>