[j-nsp] Missing BGP Routes
Eric Van Tol
eric at atlantech.net
Tue Mar 17 13:13:52 EDT 2009
Hi all,
In what instance would a router be missing routes that are advertised to it? And by missing, I don't mean 'inactive' or 'hidden'. I have four routers peering through a full-mesh IBGP, one of which is advertising several routes that were received from a route reflector client. The routes are being sent from the route reflector router to all IBGP sessions and they are seen by only three out of four of the non-client peers. This one particular "problem" router doesn't have the prefixes anywhere in its RIB. There are no import policies on IBGP sessions denying any prefixes.
Routes received from route-reflector client:
edge02# run show route receive-protocol bgp 192.168.205.51
inet.0: 280459 destinations, 1146831 routes (279785 active, 3 holddown, 1448 hidden)
Restart Complete
Prefix Nexthop MED Lclpref AS path
* 172.16.234.0/25 192.168.205.54 0 100 I
* 172.16.236.0/27 192.168.205.55 0 100 I
* 172.16.236.32/28 192.168.205.55 0 100 I
* 172.16.236.48/30 192.168.205.56 0 100 I
* 172.16.236.144/28 192.168.205.55 0 100 I
* 172.16.236.160/29 192.168.205.55 0 100 I
* 172.16.237.128/25 192.168.205.56 0 100 I
* 172.16.239.224/27 192.168.205.51 0 100 I
192.168.206.129 is sending these routes to 192.168.206.128, which is a non-client peer:
edge02# run show route advertising-protocol bgp 192.168.206.128 172.16.236.0/22
inet.0: 280471 destinations, 1146944 routes (279808 active, 0 holddown, 1399 hidden)
Restart Complete
Prefix Nexthop MED Lclpref AS path
* 172.16.236.0/27 192.168.205.55 0 100 I
* 172.16.236.32/28 192.168.205.55 0 100 I
* 172.16.236.48/30 192.168.205.56 0 100 I
* 172.16.236.144/28 192.168.205.55 0 100 I
* 172.16.236.160/29 192.168.205.55 0 100 I
* 172.16.237.128/25 192.168.205.56 0 100 I
* 172.16.239.224/27 192.168.205.51 0 100 I
192.168.206.128 doesn't show these routes anywhere:
edge01> show route receive-protocol bgp 192.168.206.129 172.16.192.0/18
inet.0: 280324 destinations, 940059 routes (279811 active, 0 holddown, 1210 hidden)
Restart Complete
edge01> show route receive-protocol bgp 192.168.206.129 172.16.192.0/18 hidden
inet.0: 280327 destinations, 940062 routes (279815 active, 0 holddown, 1210 hidden)
Restart Complete
And the view from the other two non-client peers:
core02> show route receive-protocol bgp 192.168.206.129 172.16.192.0/18 table inet.0
inet.0: 280139 destinations, 567582 routes (279540 active, 0 holddown, 770 hidden)
Restart Complete
Prefix Nexthop MED Lclpref AS path
* 172.16.234.0/25 192.168.205.54 0 100 I
* 172.16.236.0/27 192.168.205.55 0 100 I
* 172.16.236.32/28 192.168.205.55 0 100 I
* 172.16.236.48/30 192.168.205.56 0 100 I
* 172.16.236.144/28 192.168.205.55 0 100 I
* 172.16.237.128/25 192.168.205.56 0 100 I
* 172.16.239.224/27 192.168.205.51 0 100 I
core01> show route receive-protocol bgp 192.168.206.129 172.16.192.0/18 table inet.0
inet.0: 280147 destinations, 567688 routes (279612 active, 0 holddown, 727 hidden)
Restart Complete
Prefix Nexthop MED Lclpref AS path
* 172.16.234.0/25 192.168.205.54 0 100 I
* 172.16.236.0/27 192.168.205.55 0 100 I
* 172.16.236.32/28 192.168.205.55 0 100 I
* 172.16.236.48/30 192.168.205.56 0 100 I
* 172.16.236.144/28 192.168.205.55 0 100 I
* 172.16.237.128/25 192.168.205.56 0 100 I
* 172.16.239.224/27 192.168.205.51 0 100 I
Thanks,
evt
More information about the juniper-nsp
mailing list