[j-nsp] Missing BGP Routes
Jeff S Wheeler
jsw at inconcepts.biz
Tue Mar 17 14:01:18 EDT 2009
On Tue, 2009-03-17 at 10:46 -0700, Harry Reynolds wrote:
> Normally an as path loop or other sanity check results in this state.
> >>From the config below does not seem this is the case. Perhaps add
> keep-all, restart/soft clear session, and then display hidden. Perhaps
> something will jump out.
> Does tracing show any errors when the routes are processed? Unreachable
> next hop normally is just hidden so does not seem the case here. Should
> not matter, but I normally doe not specify peer-as for an int group.
> Again should not break things but worth trying w/o.
Configuring peer-as for an iBGP group does not break anything. I think
you agree with my suspicion that it is a cluster list loop or similar
sanity check failure.
Eric's last post including some config is confusing, I think because
both the "working" and "non-working" routers are called edge01, or more
likely the paste is in error. I suggest pastebin.
Jeff S Wheeler <jsw at inconcepts.biz> +1-212-981-0607
Sr Network Operator / Innovative Network Concepts
More information about the juniper-nsp