[j-nsp] Missing BGP Routes

[Eric Van Tol]

Yes, my bad.  The configs are exactly the same as it relates to the ibgp group, so I copied the original one and just replaced IPs.  I assure you they are the same!

-evt
 
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Jeff S Wheeler
> Sent: Tuesday, March 17, 2009 2:01 PM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Missing BGP Routes
> 
> On Tue, 2009-03-17 at 10:46 -0700, Harry Reynolds wrote:
> > Normally an as path loop or other sanity check results in this state.
> > >>From the config below does not seem this is the case. Perhaps add
> > keep-all, restart/soft clear session, and then display hidden. Perhaps
> > something will jump out.
> >
> > Does tracing show any errors when the routes are processed?  Unreachable
> > next hop normally is just hidden so does not seem the case here. Should
> > not matter, but I normally doe not specify peer-as for an int group.
> > Again should not break things but worth trying w/o.
> Configuring peer-as for an iBGP group does not break anything.  I think
> you agree with my suspicion that it is a cluster list loop or similar
> sanity check failure.
> 
> Eric's last post including some config is confusing, I think because
> both the "working" and "non-working" routers are called edge01, or more
> likely the paste is in error.  I suggest pastebin.
> 
> --
> Jeff S Wheeler <jsw at inconcepts.biz> +1-212-981-0607
> Sr Network Operator  /  Innovative Network Concepts
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp