[j-nsp] how to populate a forwarding routing-instance

Bit Gossip bit.gossip at chello.nl
Wed May 6 09:52:42 EDT 2009


Hi Martin,
indeed with rib-group I can import in the routing-instance PIPPO the 
connected and local routes, but still BGP doesn't come up because I 
think the process can not bind to the address of the local interface 
which is still part of a different routing-instance, the default one. 
For the same reason while also ping fails:

rc2# run ping 1.1.1.2 source 1.1.1.1 routing-instance PIPPO
PING 1.1.1.2 (1.1.1.2): 56 data bytes
ping: sendto: Can't assign requested address

Thanks,
bit.

martin.mogensen at bt.com wrote:
> Indeed, the interfaces routes from inet.0 are unknown to your new routing-instance which is as expected. You can use rib-groups (routing table groups) to import the connected interface routes into your new routing-instance. 
>
> I haven't tested the exact config below, but the concept is as follows:
>
> # define that interface routes should be processed by a new rib-group
> routing-options {
>     interface-routes {
>         rib-group inet connected;
>         }
>     }
> # define that the routes matching the new rib-groups are copied from inet.0 to your new routing-instance
>     rib-groups connected {
>         import-rib [ inet.0 PIPPO.0 ];
>    }
> }
>
> You may call that exporting routes but JUNOS sees it as importing routes. Guess it depends on the perspective. 
>
> When you do a show you after the commit, the connected routes from inet.0 should show up in PIPPO.0 with "Primary Routing Table inet.0" if you do a "show route detail". Same route, but in a different table.
>
> Cheers
> Martin
>
> -----Message d'origine-----
> De : Bit Gossip [mailto:bit.gossip at chello.nl] 
> Envoyé : mercredi 6 mai 2009 14:48
> À : Mogensen,M,Martin,JPECS R
> Cc : juniper-nsp at puck.nether.net
> Objet : Re: [j-nsp] how to populate a forwarding routing-instance
>
> Martin,
> as a 'virtual-router' the protocol configuration commits correctly but still I have a little problem:
> to setup the BGP session, I need the connecting interface in the routing-instance PIPPO as well as in the global routing-instance for normal forwarding and this is not accepted :-( any idea how to work around that?
> Thanks,
> bit.
>
> martin.mogensen at bt.com wrote:
>   
>>  
>> Hello
>>
>> Try "instance-type virtual-router" instead of "instance-type forwarding" to be able to support routing protocols - this way the commit should work. "instance-type virtual-router" also support filter-based forwarding.
>>
>> Cheers
>> Martin
>>
>> -----Message d'origine-----
>> De : juniper-nsp-bounces at puck.nether.net 
>> [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Bit Gossip 
>> Envoyé : mercredi 6 mai 2009 12:18 À : juniper-nsp Objet : [j-nsp] how 
>> to populate a forwarding routing-instance
>>
>> Experts,
>> I want to configure FilterBasedForwarding and so I need a routing-instance of type forwarding.
>> I have no issue to populate the routing-instance with static routes; but in reality I would like to use bgp to populate it; and this doesn't commit.
>> Is it possible to use bgp for that? If not, any other way to achieve FBF using a routing protocol rather than static for the alternate forwarding?
>> Thanks,
>> bit.
>>
>> lab at rc2# show | compare
>> [edit routing-instances]
>> +   PIPPO {
>> +       instance-type forwarding;
>> +           router-id 1.1.1.1;
>> +           autonomous-system 1;
>> +       }
>> +       protocols {
>> +           bgp {
>> +               group BC {
>> +                   neighbor 2.2.2.2 {
>> +                       peer-as 2;
>> +                   }
>> +               }
>> +           }
>> +       }
>> +   }
>>
>> [edit]
>> lab at rc2# commit check
>> [edit routing-instances PIPPO]
>>   'protocols'
>>     Protocol BGP not allowed under forwarding (0x1) instance PIPPO
>> error: configuration check-out failed
>>
>> rc2# run show version
>> Hostname: rc2
>> Model: mx480
>> JUNOS Base OS boot [9.3-20090213.1]
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>   
>>     
>
>   



More information about the juniper-nsp mailing list