[j-nsp] M10i router

[sthaug at nethelp.no]

> However my concern is can we use 10 Gi PIC on M10i or M20 router? I have
> check the Table of PICs Supported in the M10i & M20 from www.juniper.net, it
> is not listed.
> Does that mean it is not supported?

Correct. Both M10i and M20 can handle STM-16 (in the form of a full width
FPC with integrated PIC), but not 10Gig.

If you need 10Gig Ethernet, you might want to look at the MX series. If
you need SDH STM-64 interface you need to look at M120, M320 and T series.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no