[j-nsp] M10i router

[Dave Humphrey]

MX will do STM64 now with the MXFPC-3. Not great for port density but it does at least make the option available if you really need it.

Dave Humphrey

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of sthaug at nethelp.no
Sent: 18 May 2009 16:26
To: chteh at nav6.org; freeelancers at gmail.com
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] M10i router

> However my concern is can we use 10 Gi PIC on M10i or M20 router? I 
> have check the Table of PICs Supported in the M10i & M20 from 
> www.juniper.net, it is not listed.
> Does that mean it is not supported?

Correct. Both M10i and M20 can handle STM-16 (in the form of a full width FPC with integrated PIC), but not 10Gig.

If you need 10Gig Ethernet, you might want to look at the MX series. If you need SDH STM-64 interface you need to look at M120, M320 and T series.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no _______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________