[j-nsp] M10i router

Brandon Bennett bennetb at gmail.com
Mon May 18 12:37:03 EDT 2009


An M20 pic will go into a M10i just fine, but as Ron said the bottom plate
if different.   This means unsupported.

To get the M20 PIC in a M10i you will need to pull out the adjacent pic and
have someone with a flash light shining in the slot to line up the pins
properly as not to bend them.   To remove the PIC you will have to remove
the adjacent PIC and pull from behind (there is no ejection mechanism)

HTH,

Brandon Bennett


More information about the juniper-nsp mailing list