[j-nsp] Olive and l2circuit
danny.vernals at gmail.com
Thu May 28 08:12:51 EDT 2009
On Wed, May 27, 2009 at 4:30 PM, Harry Reynolds <harry at juniper.net> wrote:
> I have not tried in years, but the last I did, an olive would not do l2. All was A-ok in the control plane, but no data would flow.
> Sounds like what you have hit.
I've tried this with both VMware and Qemu virtualisation and also had
no joy. I'm assuming this is down to the data plane limitations of em
/ fxp interfaces (for Kompella style L2 VPN you can't even configure
the required encapsulation type on these interfaces).
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Thiago Drechsel
> Sent: Wednesday, May 27, 2009 6:03 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Olive and l2circuit
> Hi list.
> Was anybody able to configure/test l2circuit using olive running on virtual machines?
> A have a basic topology, for study purposes, everything is correctly configured but traffic don't go through the pw.
> Any similar experience on the list?
> Thank you!
> juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp