[j-nsp] Olive and l2circuit

[Junos Guy]

As far as l2ckt(ldp) is concerned it supports both vlan-ccc on em/fxp and
works pretty well.

L2vpn doesn't work as  em/fxp isn't supported in the l2vpn routing-instance.

On Thu, May 28, 2009 at 5:42 PM, Danny Vernals <danny.vernals at gmail.com>wrote:

> On Wed, May 27, 2009 at 4:30 PM, Harry Reynolds <harry at juniper.net> wrote:
> > I have not tried in years, but the last I did, an olive would not do l2.
> All was A-ok in the control plane, but no data would flow.
> >
> > Sounds like what you have hit.
> >
>
> I've tried this with both VMware and Qemu virtualisation and also had
> no joy.  I'm assuming this is down to the data plane limitations of em
> / fxp interfaces (for Kompella style L2 VPN you can't even configure
> the required encapsulation type on these interfaces).
>
> > Regards
> >
> >
> >
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net [mailto:
> juniper-nsp-bounces at puck.nether.net] On Behalf Of Thiago Drechsel
> > Sent: Wednesday, May 27, 2009 6:03 AM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] Olive and l2circuit
> >
> > Hi list.
> >
> > Was anybody able to configure/test l2circuit using olive running on
> virtual machines?
> > A have a basic topology, for study purposes, everything is correctly
> configured but traffic don't go through the pw.
> >
> > Any similar experience on the list?
> >
> > Thank you!
> >
> > Thiago
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>