[j-nsp] urgent

[Hoogen]

#show interfaces fe-0/0/0
fastether-options {
802.3ad ae0;
}
r3# show interfaces ae0
vlan-tagging;
aggregated-ether-options {
minimum-links 2;
}
#show chassis aggregated-devices
ethernet {
device-count 1;
}

set protocols ospf area <area-id> interface ae0.(unit number)

And you are all set...

show interfaces ae0 <-- Should give you some detail.. use the detail switch
for more information

-Hoogen
On Sun, Nov 1, 2009 at 1:08 AM, chandrasekaran iyer <shekar1975 at gmail.com>wrote:

> Hi all,
>
>   I would like to run ospf over aggregated interface (say ae2) and
> check neighborship comes up, also ping to other end.
>  I need sample configs, show commands to check aggregated bundle and
> ospf over aggregated bundle.
>
> --
> Thanks with regards
>
> Shekar.B
> --
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>