[j-nsp] urgent

[Fahad Khan]

show protocol ospf overview

can also give you the idea probably

regards,

On Sun, Nov 1, 2009 at 1:57 PM, Hoogen <hoogen82 at gmail.com> wrote:

> #show interfaces fe-0/0/0
> fastether-options {
> 802.3ad ae0;
> }
> r3# show interfaces ae0
> vlan-tagging;
> aggregated-ether-options {
> minimum-links 2;
> }
> #show chassis aggregated-devices
> ethernet {
> device-count 1;
> }
>
> set protocols ospf area <area-id> interface ae0.(unit number)
>
> And you are all set...
>
> show interfaces ae0 <-- Should give you some detail.. use the detail switch
> for more information
>
> -Hoogen
> On Sun, Nov 1, 2009 at 1:08 AM, chandrasekaran iyer <shekar1975 at gmail.com
> >wrote:
>
> > Hi all,
> >
> >   I would like to run ospf over aggregated interface (say ae2) and
> > check neighborship comes up, also ping to other end.
> >  I need sample configs, show commands to check aggregated bundle and
> > ospf over aggregated bundle.
> >
> > --
> > Thanks with regards
> >
> > Shekar.B
> > --
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-321-2370510
+92-301-8247638
Skype: fahad-ibm
http://www.linkedin.com/in/muhammadfahadkhan
http://fahad-internetworker.blogspot.com