[j-nsp] No Reflector-Client Command Supporte

Muhammad Aamir aamirwwol at gmail.com
Wed Oct 7 01:52:25 EDT 2009


I belive you are looking for no-client-reflect key-word. In RR cluster every
route received from client by RR is readertised to all other client except
then one form that particular route is received. This is a default behavior
of RR and no-client-reflect key-word is used to alter this behavior, after
configuring no-client-reflect at RR then you must have iBGP full mesh in
your RR cluster to avoid any routing blackholes. no-client-reflect is
supported at both group and neighbor level.


More information about the juniper-nsp mailing list