[j-nsp] group interface

[alain.briant at bt.com]

This has been discused several times on the Juniper J-net forum

http://forums.juniper.net/jnet/board/message?board.id=switch&thread.id=672
http://forums.juniper.net/jnet/board/message?board.id=switch&message.id=525

The answer is yes via Groups
The answer is also yes via JWEB in which you can select several interfaces and change the config.
 

-----Message d'origine-----
De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de techtalm at gmail.com
Envoyé : jeudi 15 octobre 2009 18:30
À : mvh at hosteurope.de
Cc : juniper-nsp at puck.nether.net
Objet : Re: [j-nsp] group interface

Any chance for apply-group should accomplish this?

Is quite wired that Junos can handle this kind of operation.

 

  _____  

From: Malte von dem Hagen [mailto:mvh at hosteurope.de]
Sent: Thursday, October 15, 2009 5:26 PM
To: techtalm at gmail.com
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] group interface

 

Hi,

techtalm at gmail.com schrieb:
> Which Junos command is parallel to IOS "interface range"?

there is none, please see
http://puck.nether.net/pipermail/juniper-nsp/2009-July/013598.html
and following for a not-so-old discussion regarding this topic.

Depending on what is your goal, groups or macros/scripts may help you.

rgds,

Malte

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp