[j-nsp] group interface

[Patrik Olsson]

Yes, an apply group would do fine in this task if it is identical
information for several ports.

Patrik

techtalm at gmail.com wrote:
> Any chance for apply-group should accomplish this?
> 
> Is quite wired that Junos can handle this kind of operation.
> 
>  
> 
>   _____  
> 
> From: Malte von dem Hagen [mailto:mvh at hosteurope.de] 
> Sent: Thursday, October 15, 2009 5:26 PM
> To: techtalm at gmail.com
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] group interface
> 
>  
> 
> Hi,
> 
> techtalm at gmail.com schrieb:
>> Which Junos command is parallel to IOS "interface range"?
> 
> there is none, please see
> http://puck.nether.net/pipermail/juniper-nsp/2009-July/013598.html
> and following for a not-so-old discussion regarding this topic.
> 
> Depending on what is your goal, groups or macros/scripts may help you.
> 
> rgds,
> 
> Malte
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


-- 

//Patrik

Webkom
http://www.webkom.se

+46 (0)709 35 22 99
+46 (0)8 559 26 488