[j-nsp] Interoperability between the EX3200 and the Cisco Catalyst 6509

[Murphy, Jay, DOH]

Any experience with interoperability issues between the EX3200 and the
Catalyst 6509?  Can ping the Ethernet link between the two, however,
cannot ping any other subnets outside of the /30. The LAN subnet points
to the appropriate gateway, however, no success. Cisco running EIGRP, so
I did a redistribute into OSPF, which is enabled on the EX3200.  Any
ideas?  Anyone.

~Jay Murphy 
IP Network Specialist

"We move the information that moves your world." 
"Good engineering demands that we understand what we're doing and why,
keep an open mind, and learn from experience."
"Engineering is about finding the sweet spot between what's solvable and
what isn't."
				Radia Perlman
P Please consider the environment before printing e-mail




Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System. 



______________________________________________________________________
Confidentiality Notice: This e-mail,including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review,use,disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. 

This email has been scanned using Webroot Email Security.
______________________________________________________________________