[j-nsp] Logical Interfaces 802.1ad

[Onam Rubio]

 <COL111-W11E30F71C3646030A1B690A1C10 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0



=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0=A0 192.168.38.60/30
-------
|=A0=A0=A0=A0 |
|=A0=A0=A0=A0 |.61=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 _____=
__=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 _______=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0 .62 _________
| M10 |ge-0/2/0.50=A0 P50(T) |=A0=A0=A0=A0=A0=A0 |P49(T)P49|=A0=A0=A0=A0=A0=
=A0 |P4(T)=A0 f0/0.50=A0=A0 |=A0=A0=A0=A0=A0=A0=A0=A0 |
|=A0=A0=A0=A0 |<------------------>| x450=A0 |<------->| x450=A0 |<--------=
------> | c1751=A0=A0 |
|=A0=A0=A0=A0 |=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 |_=
______|=A0=A0=A0=A0=A0=A0=A0=A0 |_______|=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0 |_________|
-------=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=20
=A0=A0=A0=A0=A0=A0>----Doesn't work----<=A0=A0=A0=A0=A0=A0>----------------=
-It works--------<


> From: onamrubio at hotmail.com
> To: evgeniy at ip.datagroup.ua
> Date: Mon=2C 19 Oct 2009 10:49:26 -0600
> CC: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Logical Interfaces 802.1ad
>=20
>=20
> Hello Experts=2C
>=20
> In the diagram topology I am working with the VMAN tag 50. I made some te=
st with a CISCO router and it works.
>=20
> I check the jumbo-frame at the summit side and is enable to all ports.
>=20
>> Date: Mon=2C 19 Oct 2009 10:47:16 +0300
>> From: evgeniy at ip.datagroup.ua
>> To: onamrubio at hotmail.com
>> CC: juniper-nsp at puck.nether.net
>> Subject: Re[2]: [j-nsp] Logical Interfaces 802.1ad
>>=20
>> Also works fine:
>>=20
>> {master}[edit interfaces xe-4/1/0]
>> evgeniy at mx480# show
>> description "=3D=3D=3D Summit X650 test =3D=3D=3D"=3B
>> flexible-vlan-tagging=3B
>> encapsulation flexible-ethernet-services=3B
>> gigether-options {
>>     ethernet-switch-profile {
>>         tag-protocol-id 0x88a8=3B
>>     }
>> }
>> unit 100 {
>>     description "=3D=3D=3D Summit X650 test =3D=3D=3D"=3B
>>     vlan-tags outer 0x88a8.4092 inner 100=3B
>>     family inet {
>>         address x.x.x.x/30=3B
>>     }
>> }
>>=20
>>  Summit:
>>  enable jumbo-frame ports all
>>=20
>>=20
>> best regards=2C
>> --=20
>> Evgeniy Aikashev
>> network engineer
>> JSC DATAGROUP
>>=20
>> Monday=2C October 19=2C 2009=2C 10:17:22 AM=2C Onam wrote:
>>> Hello Evgeniy=2C
>>=20
>>> I made some test before with this ethertype and it works. The Extreme x=
450 use both of them
>>> 0x8100 for VLAN and 0x88a8 for VMAN so if i do that the VMAN will becom=
e a VLAN.
>>=20
>>> I see that by default the Juniper router M10 use ethertype 0x8100=2C bu=
t when I try to use
>>> ethertype 0x88a8 the devices doens't see each other=2C I run a ping to =
the other side with no response.
>>=20
>>=20
>>>> Date: Mon=2C 19 Oct 2009 09:58:23 +0300
>>>> From: evgeniy at ip.datagroup.ua
>>>> To: onamrubio at hotmail.com
>>>> CC: juniper-nsp at puck.nether.net
>>>> Subject: Re: [j-nsp] Logical Interfaces 802.1ad
>>>>=20
>>>> Hello Onam=2C
>>>> try to change ethertype from Summit side:
>>>>=20
>>>> configure vman ethertype 0x8100
>>>>=20
>>>> best regards=2C
>>>> --=20
>>>> Evgeniy Aikashev
>>>> network engineer
>>>> JSC DATAGROUP
>>>>=20
>>>> Monday=2C October 19=2C 2009=2C 3:30:51 AM=2C Onam wrote:
>>>>=20
>>>>> Hi experts=2C
>>>>=20
>>>>> I want to make logical interfaces on a physical interface ge-0/2/0 of=
 a Juniper M10 router to
>>>>> connected to a the trunk port of a Summit Extreme x450 with the ether=
type 0x88a8 (IEEE 802.1ad).
>>>>=20
>>>>> I have the following configuration on the router.
>>>>=20
>>>>> ge-0/2/0 {
>>>>> vlan-tagging=3B
>>>>> gigether-options {
>>>>> ethernet-switch-profile {
>>>>> tag-protocol-id 0x88a8=3B
>>>>> }
>>>>> }
>>>>> unit 50 {
>>>>> vlan-tags outer 0x88a8.50=3B
>>>>> family inet {
>>>>> address 192.168.175.169/28=3B
>>>>> }
>>>>> }
>>>>> }
>>>>=20
>>>>> I made the test with the 802.1q and it works but with 802.1ad didn't =
work.
>>>>=20
>>>>> Best regards.
>>>>>=20
>>>>> _________________________________________________________________
>>>>> News=2C entertainment and everything you care about at Live.com. Get =
it now!
>>>>> http://www.live.com/getstarted.aspx
>>>>> _______________________________________________
>>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>>=20
>>=20
>>> Get news=2C entertainment and everything you care about at Live.com. Ch=
eck it out!=20
>>=20
>  		 	   		 =20
> _________________________________________________________________
> News=2C entertainment and everything you care about at Live.com. Get it n=
ow!
> http://www.live.com/getstarted.aspx
 		 	   		 =20
_________________________________________________________________
News=2C entertainment and everything you care about at Live.com. Get it now=
!
http://www.live.com/getstarted.aspx=