[j-nsp] Layer3 LACP Bundle

[Árni Birgisson]

Not sure if it matters, but are you using 2 bundles?
Otherwise you could try setting the device-count to 1.

-Arni


On Oct 28, 2009, at 4:23 PM, Bill Blackford wrote:

> I am attempting to form a L3 bundle on a EX3200 and am running into  
> snags. I've been able to form L2 LACP bundles but first time  
> attempting at L3.
> I'm not able to link with another switch, host or device that also  
> is configured with a LACP L3 bundle.
>
> Details:
>
>
> EX3200
> Ver 9.5R2.7
>
>
>
>
> chassis {
>    aggregated-devices {
>        ethernet {
>            device-count 2;
>        }
>    }
> }
>
>
>    ge-0/0/22 {
>        description "Port1";
>        ether-options {
>            802.3ad ae0;
>        }
>    }
>    ge-0/0/23 {
>        description "Port2";
>        ether-options {
>            802.3ad ae0;
>        }
>    }
>
>
>    ae0 {
>        description L3 Bundle;
>        aggregated-ether-options {
>            lacp {
>                active;
>            }
>        }
>        unit 0 {
>            family inet {
>                address xxx.xxx.xxx.xxx/29;
>            }
>        }
>    }
>
>
>
>
> Thanks in advance
>
> -b
>
>
>
> --
> Bill Blackford
> Senior Network Engineer
> Technology Systems Group
> Northwest Regional ESD
>
> my /home away from home
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp



Arni Birgisson	
Network Engineer
FATTOC Iceland
Adalstraeti 6
101 Reykjavik
Iceland