[j-nsp] Slot zero on the ERX chassis

[Shiva Shankar]

Do you have redundant slot comnibation for slot 0,1&2..if so, then you can't
mis-match different card...

Cheers

On Tue, Sep 1, 2009 at 10:27 PM, Scott Weeks <surfer at mauigateway.com> wrote:

>
>
> -----Original Message-----
> Is there an issue where the ERX will not accept a DS3-4P I/O and
> OC3/OC12/DS3-ATM card set in slot zero?  I am having no luck with search
> engines and our vendor's support folks.  There is no problem when I put them
> in other slots.
> ----------------------------------
>
>
> --- avance at hq.speakeasy.net wrote:--------
> From: Andy Vance <avance at hq.speakeasy.net>
>
> None that I'm aware of, can you shoot a show hard and a show ver from that
> chassis with the card in?  We have GE cards in slot 0 but I don't recall any
> card type limitation.
> -----------------------------------------
>
>
>
> The card is not in there now.  I did the normal slot disable, erase and
> accept stuff and all I see is hardware error after it tries to boot, but it
> does not do this on the other slots.  We have more than one ERX, I guess
> I'll try another.  I just wanted to ask the group before I got a tech out
> there at 2am again...
>
> scott
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ======================
> ====================
> =====================
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>