[j-nsp] Load balacing issue - M7i

Benny Sumitro benny.sumitro at gmail.com
Wed Sep 16 22:42:01 EDT 2009


AFAIK, payload ip will only makes the router to use 5 least significant bits
of DA in the hashing algorithm.

For the label 1, i still confuse if the router uses top label which is
transport mpls label or bottom label which is vpn label. Maybe the experts
here can shed a light on this :)


On Wed, Sep 16, 2009 at 4:47 PM, Shiva Shankar <shankarks at gmail.com> wrote:

> Hi Gebts Ladies.....A quick question on load balancing on juniper M7i
> running Junos 8.4R2..The config I have on the router is:
> family mpls { label-1;  payload { ip; } }
> The documentation says, for load-balacing (or load sharing per flow), the
> above uses label-1 (which is VPN label) and bits of IPv4 addess..My
> question
> is,  (i) does it includes all the bits in an IPv4 address or just few bits
> of IPv4 address?     cheers
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list