[j-nsp] Load balacing issue - M7i

[Shankar]

Thanks for that info Benny. In a leyr 3 environmet, Label 1 should be VPN
label, and label 2 should be MPLS label....

Cheer

On Thu, Sep 17, 2009 at 3:42 AM, Benny Sumitro <benny.sumitro at gmail.com>wrote:

> Hi,
>
> AFAIK, payload ip will only makes the router to use 5 least significant
> bits of DA in the hashing algorithm.
>
> For the label 1, i still confuse if the router uses top label which is
> transport mpls label or bottom label which is vpn label. Maybe the experts
> here can shed a light on this :)
>
> BR,
> Benny
>
>   On Wed, Sep 16, 2009 at 4:47 PM, Shiva Shankar <shankarks at gmail.com>wrote:
>
>>  Hi Gebts Ladies.....A quick question on load balancing on juniper M7i
>> running Junos 8.4R2..The config I have on the router is:
>>
>> family mpls { label-1;  payload { ip; } }
>>
>> The documentation says, for load-balacing (or load sharing per flow), the
>> above uses label-1 (which is VPN label) and bits of IPv4 addess..My
>> question
>> is,  (i) does it includes all the bits in an IPv4 address or just few bits
>> of IPv4 address?     cheers
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>