[j-nsp] Load balacing issue - M7i

[tim.hunt at bt.com]

It may depend on the environment you are trying to perform load sharing
in, but we were informed by J-TAC that the M7i CFEB could not perform
MPLS loadsharing across 2 equal cost paths - I'd love to be proved wrong
;-) An Enhanced CFEB would be required :(

May be worth checking with J-TAC for your particular case.

Cheers,
Tim.

>   On Wed, Sep 16, 2009 at 4:47 PM, Shiva Shankar
<shankarks at gmail.com>wrote:
>
>>  Hi Gebts Ladies.....A quick question on load balancing on juniper
M7i
>> running Junos 8.4R2..The config I have on the router is:
>>
>> family mpls { label-1;  payload { ip; } }
>>
>> The documentation says, for load-balacing (or load sharing per flow),
the
>> above uses label-1 (which is VPN label) and bits of IPv4 addess..My
>> question
>> is,  (i) does it includes all the bits in an IPv4 address or just few
bits
>> of IPv4 address?     cheers
*******