[j-nsp] ipv6 routing

[Antonio Querubin]

On Thu, 1 Apr 2010, Ramesh Karki wrote:

> Similar ospf config between cisco to cisco is okay there is not any issue.
> But between cisco to M10i is not working.
> Here, I have listed my JunOS ospf config :
> run show configuration protocols ospf3
> preference 10;
> area 0.0.0.10 {
>    interface lo0.0 {
>        passive;
>    }
>    interface ge-0/0/0.0 {
>        metric 10;
>
> am I missing anything ??
>
> My curiosity : when I execute the command > run show ospf3 interface
> ge-0/0/0.0 it says -
> “OSPF instance is not running” ??

Is your ospf config similar for both IPv4 and IPv6?  Does 'show ospf 
interface' give you the same thing?

Antonio Querubin
808-545-5282 x3003
e-mail/xmpp:  tony at lava.net