[j-nsp] ipv6 routing

[Ramesh Karki]

Hi,

I don't have JTAC support to open the case.

Could you pls tell me the exact 9.2 JUNOS version?
The exact version is 9.2R2.15.

Thank you,


On Sun, Apr 4, 2010 at 1:25 PM, Nilesh Khambal <nkhambal at juniper.net> wrote:

> Never mind...found answers to my questions in the previous emails to this
> threads. Sorry for the spam. I was emailing from my cell. Let me see if I
> can find anything and get back. Btw, do you have a JTAC case open for this
> issue?
>
> Could you pls tell me the exact 9.2 JUNOS version?
>
> Thanks,
> Nilesh.
>
>
> On 4/4/10 12:21 AM, "Nilesh Khambal" <nkhambal at juniper.net> wrote:
>
> > can you show us your ospf and ospf3 configuration? Also, have you
> specified
> > router-id under routing-options?
> >
> > Thanks,
> > Nilesh
> >
> > -----Original Message-----
> >
> > From:  "Ramesh Karki" <rameshkarki at gmail.com>
> > Subj:  Re: [j-nsp] ipv6 routing
> > Date:  Sat Apr 3, 2010 10:52 pm
> > Size:  1K
> > To:  "mtinka at globaltransit.net" <mtinka at globaltransit.net>
> > cc:  "Antonio Querubin" <tony at lava.net>; "juniper-nsp at puck.nether.net"
> > <juniper-nsp at puck.nether.net>
> >
> > Hi Mark,
> >
> > As I have already mentioned, the same interface fe-0/1/0 has been
> configured
> > to run both ospf and ospf3 and there is no any issue on ospf v4 from the
> > beginning.
> >
> >> show ospf interface fe-0/1/0.0
> > Interface           State   Area            DR ID           BDR ID
> >  Nbrs
> > fe-0/1/0.0          BDR     0.0.0.10         x.x.192.4    x.x.192.1
> 1
> >
> > but the same interface configured for ospf3 outcome is unexpected.
> >
> >> show ospf3 interface fe-0/1/0.0
> >    OSPF instance is not running
> >
> > Thank you,
> > Ramesh
> >
> >
> > On Sat, Apr 3, 2010 at 9:25 AM, Mark Tinka <mtinka at globaltransit.net>
> wrote:
> >
> >> On Friday 02 April 2010 04:17:15 am Antonio Querubin wrote:
> >>
> >>> show ospf interface fe-0/1/0.something
> >>>
> >>> show ospf3 interface fe-0/1/0.something
> >>
> >> Ramesh, did you get a chance to run the commands above as
> >> requested by Antonio?
> >>
> >> I'm curious to see what's going on here, especially since,
> >> for all intents and purposes, your configuration looks
> >> alright.
> >>
> >> Cheers,
> >>
> >> Mark.
> >>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>