[j-nsp] Low power warning

[Thomas Eichhorn]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You can graph it via XNM and some RRDTool magic -
I have written some examples for this and will put them
public within the next weeks.

This is basically to graph everything which you can see on
the CLI.

Tom

Bjørn Tore Paulen schrieb:
> Richard A Steenbergen skrev:
> 
>> (...)
>> Hrm... The lack of ability to do "show interfaces diagnostic optics" and
>> see all interfaces has been on my bitch-list for the last 3+ years. I
>> had just given up hope that they were ever going to do anything to fix
>> it (or support the reverse order "show interface xe-0/0/0 diagnostics
>> optics" for that matter), so I had stopped even checking... But after
>> reading this email I just went back and checked a bunch of boxes, and
>> it actually IS working on MX on every version of code we're running
>> (9.4R3 being the oldest). Guess they slipped it in when we weren't
>> looking.
>>   
> But still not possible to graph this? I.e. any working OID?
> 
> /BT
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAku+zxUACgkQrUvjMoak8ZfONQCfQG11ssK74ipAsEfI1pyb6OK2
JtgAnRXBaFJKq52maw6mQl54R6qCRM3l
=OWO4
-----END PGP SIGNATURE-----