[j-nsp] Low power warning

[Truman Boyes]

If there is not an OID you can make one for the purpose; see the jnxUtilityMib and automation scripts. 

Truman

On 8/04/2010, at 8:28 AM, Bjørn Tore Paulen wrote:

> Richard A Steenbergen skrev:
> 
>> (...)
>> Hrm... The lack of ability to do "show interfaces diagnostic optics" and
>> see all interfaces has been on my bitch-list for the last 3+ years. I
>> had just given up hope that they were ever going to do anything to fix
>> it (or support the reverse order "show interface xe-0/0/0 diagnostics
>> optics" for that matter), so I had stopped even checking... But after reading this email I just went back and checked a bunch of boxes, and it actually IS working on MX on every version of code we're running (9.4R3 being the oldest). Guess they slipped it in when we weren't looking.
>>  
> But still not possible to graph this? I.e. any working OID?
> 
> /BT
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>