[j-nsp] Setting MTU

[Leah Lynch (Contractor)]

What size MTU are trying to set? Which type of interface are you trying
to set it upon?

Leah

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Brian Boles
Sent: Monday, April 19, 2010 2:38 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Setting MTU

MX 480
10.0R2.10

I am trying to change the MTU on my MX 10g interface, but every time I
do a commit check I get this:

Family MTU is too large relative to device MTU
error: configuration check-out failed

It will let me set the MTU under interface  family inet, mpls, but
unable to commit it.
Any help would be much appreciated

Thanks,
Brian













_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.