[j-nsp] Juniper IPSEC VPN

[Chris Evans]

The asa has a hardware encryption engine in it. I don't believe that the j
series router has one. That is the root of your problem I would say.

On Apr 30, 2010 5:13 AM, "Nick Ryce" <Nick.Ryce at lumison.net> wrote:

Is there a default speed that a juniper ipec tunnel runs at?  We have an
asa5510 and an 1812 where the ipsec tunnel was running near full speed on a
10 meg link.  We swapped the 1812 with a 2320 running 9.6R2.8 and we are
seeing lost packets and slow throughput.  The tunnel does not drop once
established but packets continue to be lost.  Any ideas?

Nick

--
Nick Ryce
Network Engineer
Lumison
08451199999

P.S. do you love Lumison?  Why not take a moment and vote for us?
http://bit.ly/Vote_Lumison



--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison accept no liability for any
damage caused by any virus transmitted by this email.

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp