[j-nsp] Traffic drops on IPSEC - SRX3600

[Amos Rosenboim]

We had a the exact same thing on the lower end SRX (240 if I remember correctly).
This was resolved by a software upgrade to the latest SRX image at the time.

Amos

On Aug 2, 2010, at 2:48 PM, Fahad Khan wrote:

> Hi folks,
> 
> I am seeing very strange issue on SRX3600 when the traffic is flown through
> an IPSEC VPN tunnel (established with ISG2000), the tunnel gets up and the
> traffic flows properly, but suddenly traffic drops, while the tunnel remains
> up.
> 
> And it continues to flow after 15 to 20 time out but again it starts
> droping. I am sure that there is no issue at physical layer.
> 
> Has any body faced it yet??
> 
> Please reply ASAP.
> 
> Thanks in adv
> 
> regards
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-301-8247638
> Skype: fahad-ibm
> http://pk.linkedin.com/in/muhammadfahadkhan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp