[j-nsp] Traffic drops on IPSEC - SRX3600

Fahad Khan fahad.khan at gmail.com
Mon Aug 2 09:45:02 EDT 2010


You mean although you were using recommended Junos but u had the same issue
and you upgraded to latest junos?

Can you tell me which Junos version are u using currently??

awaiting for urgent response.

regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://pk.linkedin.com/in/muhammadfahadkhan


On Mon, Aug 2, 2010 at 6:26 PM, Amos Rosenboim <amos at oasis-tech.net> wrote:

> We had a the exact same thing on the lower end SRX (240 if I remember
> correctly).
> This was resolved by a software upgrade to the latest SRX image at the
> time.
>
> Amos
>
> On Aug 2, 2010, at 2:48 PM, Fahad Khan wrote:
>
> > Hi folks,
> >
> > I am seeing very strange issue on SRX3600 when the traffic is flown
> through
> > an IPSEC VPN tunnel (established with ISG2000), the tunnel gets up and
> the
> > traffic flows properly, but suddenly traffic drops, while the tunnel
> remains
> > up.
> >
> > And it continues to flow after 15 to 20 time out but again it starts
> > droping. I am sure that there is no issue at physical layer.
> >
> > Has any body faced it yet??
> >
> > Please reply ASAP.
> >
> > Thanks in adv
> >
> > regards
> > Muhammad Fahad Khan
> > JNCIP - M/T # 834
> > IT Specialist
> > Global Technology Services, IBM
> > fahad at pk.ibm.com
> > +92-301-8247638
> > Skype: fahad-ibm
> > http://pk.linkedin.com/in/muhammadfahadkhan
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>


More information about the juniper-nsp mailing list