[j-nsp] (H-)VPLS over LDP, documentation?

[Andy Harding]

juniper does support LDP for [H-]VPLS, although they don't shout about
it.  I have done interop testing between juni mx's & tellabs 8800's & it
works fine

~andy

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Felipe Zanchet Grazziotin
> Sent: 06 August 2010 22:35
> To: juniper-nsp at punk.nether.net
> Subject: [j-nsp] (H-)VPLS over LDP, documentation?
> 
> Hello,
> 
> I've been trying to setup multi-vendor (H-)VPLS, but unfortunately it
> can
> only be done over LDP.
> 
> I'm aware of all problems of scalability, and so on, about VPLS when
> done
> over LDP, but the other vendor just cannot do it over BGP now.
> 
> All Juniper I've found documentation about this subject talks about
BGP
> configuration, am I missing anything?
> 
> My Juniper-side here is a M7i router, should be able to do this job.
> 
> Thanks in advance,
> Felipe
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp