[j-nsp] IKE gateway within routing-instance
Ben Dale
bdale at comlinx.com.au
Mon Aug 9 23:56:01 EDT 2010
Yes - I've been told this is due in 10.4
Not sure of your application, but you can still place your st0 interface inside a routing-instance, but the outgoing-interface specified in the IPSEC GW configuration must be present in inet.0
On 10/08/2010, at 12:02 AM, Walter Keen wrote:
> When i was evaluating an SRX earlier, I was told this was on the roadmap, with a date of 'before the end of the year'. Not sure if it's the same timeline for your application.
>
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net on behalf of Alexander Shikoff
> Sent: Mon 8/9/2010 5:53 AM
> To: juniper-nsp
> Subject: [j-nsp] IKE gateway within routing-instance
>
> Hello,
>
> Does anyone know are there new JunOS versions for J-series that have support for
> IKE gateway within routing-instance? Thanks.
>
> --
> MINO-RIPE
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list