[j-nsp] IKE gateway within routing-instance

[Alexander Shikoff]

On Tue, Aug 10, 2010 at 01:56:01PM +1000, Ben Dale wrote:
> Yes - I've been told this is due in 10.4
> 
> Not sure of your application, but you can still place your st0 interface inside a routing-instance, but the outgoing-interface specified in the IPSEC GW configuration must be present in inet.0 
I'm not using st-interfaces. I was trying to set up
dial-up IPSEC server with xauth.
 
> On 10/08/2010, at 12:02 AM, Walter Keen wrote:
> 
> > When i was evaluating an SRX earlier, I was told this was on the roadmap, with a date of 'before the end of the year'.  Not sure if it's the same timeline for your application.
> > 
> > 
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net on behalf of Alexander Shikoff
> > Sent: Mon 8/9/2010 5:53 AM
> > To: juniper-nsp
> > Subject: [j-nsp] IKE gateway within routing-instance
> > 
> > Hello,
> > 
> > Does anyone know are there new JunOS versions for J-series that have support for
> > IKE gateway within routing-instance? Thanks.
> > 
> > -- 
> > MINO-RIPE
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
MINO-RIPE