[j-nsp] Interface error clarification

[Dilip Srivastava]

Show interfaces command will show the last output
Monitor interfaces will show the running traffic & errors on the interfaces
from transmissions also


thanks
dilip
919650410022

On Thu, Aug 26, 2010 at 2:51 AM, Bill Blackford <BBlackford at nwresd.k12.or.us
> wrote:

> EX4200-24T 10.0S1.1
>
> When I issue a 'sh interfaces ge-0/0/21 extensive' there is a counter for
> CRC/Align Errors
>
> A 'monitor int ge-0/0/21' shows Input Framing Errors that seems to show the
> same incrementing number.
>
> Are these the same values?
>
> Thanks,
>
> -b
>
>
> --
> Bill Blackford
> Senior Network Engineer
> Technology Systems Group
> Northwest Regional ESD
>
> Logged into reality and abusing my sudo priviledges
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Thanks & Regards

Dilip Kumar Srivastava
Engineer Wipro
9650410022