[j-nsp] Interface error clarification

[sfouant at shortestpathfirst.net]

> EX4200-24T 10.0S1.1
>
> When I issue a 'sh interfaces ge-0/0/21 extensive' there is a counter for
> CRC/Align Errors
>
> A 'monitor int ge-0/0/21' shows Input Framing Errors that seems to show
> the same incrementing number.
>
> Are these the same values?

Hi Bill,

I could be wrong but if I recall correctly the 'CRC/Align Errors' are
actually a subset of 'Input Framing Errors' which would explain why they
look the same, especially if you aren't seeing any other input framing
errors on the respective interface.

HTHs.

Stefan Fouant
www.shortestpathfirst.net