[j-nsp] 10.3 on MX960 with MPC only?

[Chris Evans]

Try configuring an irb, igmp, igmp-snooping and a trunk port on 10.x code.
It will tell you its not supported.  It's never been supported per JTAC.
Also as per jtacs comment they put that statement in newer code as they
didn't know it wasnt supported before.  I asked jtac to update the
documentation.
 > Is this in documentation somewhere? I just did a quick pass through the
IGMP
> snooping docs and I did not see it stated anywhere in there... maybe I
missed
> it.
>
>
>
>
>
> ________________________________
> From: Derick Winkworth <dwinkworth at att.net>
> To: Chris Evans <chrisccnpspam2 at gmail.com>; Gavin Tweedie <gav at narx.net>
> Cc: juniper-nsp at puck.nether.net
> Sent: Tue, August 31, 2010 7:13:37 AM
> Subject: Re: [j-nsp] 10.3 on MX960 with MPC only?
>
> ###########
> I'm not even going to mention that
>
> IGMP-Snooping isn't support on trunk interfaces which blows my mind.
> ############
>
>
> wow!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp