[j-nsp] Help with DHCP relay issues on J2350 running 9.6 code

[Will McLendon]

Make sure you have DHCP as an allowed service on the reth interface in the Zone configuration:

set security zones security-zone <zone> interfaces reth0.0 host-inbound-traffic system-services dhcp

I think that will do the trick.

good luck,

Will McLendon

On Aug 31, 2010, at 3:24 PM, juniper-nsp-request at puck.nether.net wrote:

> Help with DHCP relay issues on J2350 running 9.6 code
Hi,

I recently migrated from Cisco ASA firewall to Junos 9.6 on J2350 series but I cannot get DHCP relay to work with the DHCP clients sitting behind the firewall. My configs below:

set forwarding-options helpers bootp relay-agent-option
set forwarding-options helpers bootp interface reth0.0 server x.x.x.x
set forwarding-options helpers bootp interface reth0.0 server x.x.x.x

Any ideas?
Many thanks,
Regards,
Joe