[j-nsp] juniper-nsp Digest, Vol 97, Issue 13

[Vikas Sharma]

Hi Mauritz,

LNS feature will be supported on MX in mid 2011. As of today, Juniper
has E320 / E120 and ERX to support this functionality. L2TP tunnel can
be configured using static parameter or returned via radius on all
these platform.

Regards,
Vikas

> Message: 2
> Date: Sun, 12 Dec 2010 20:50:27 +0200
> From: Mauritz Lewies <mauritz at three6five.com>
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp]  l2tp sessions on MX
> Message-ID: <B1E70862-CCB3-4C6D-9ABA-1F923564BEC1 at three6five.com>
> Content-Type: text/plain;       charset=us-ascii
>
> Hi There
>
> I have a customer that wants to build L2TP sessions from CE routers to a PE device in order to gain access to a VRF.
>
> I've done this before on Cisco's but I'm not sure if it can be done on a Juniper MX.
>
> Can anyone help with the following:
> 1. Can it be done on a MX (Rel 10.3)
> 2. What is the Junos config to do this (template, radius etc etc]
> 3. What are the Radius AV pairs in order to create a framed interface, connected to a VRF and some static routes?
>
> Any help will be greatly appreciated..
>
> Regards
>
>