[j-nsp] PIM SM RP issue

[Nilesh Khambal]

You mean RP-on-stick scenario?


On 12/15/10 4:55 PM, "Philip Palanchi" <palanchi at rutgers.edu> wrote:

> Sure thing. I'll pull this info tomorrow.  The m10i has 9.6R4.4 with ASII PIC.
> It's a one-armed router and it's only mission is to be the PIM-SM RP.
> 
> Thanks,
> Phil
> 
> ----- Original Message -----
> From: "Smith W. Stacy" <stacy at acm.org>
> To: "Philip Palanchi" <palanchi at rutgers.edu>
> Cc: "juniper-nsp" <juniper-nsp at puck.nether.net>
> Sent: Wednesday, December 15, 2010 2:00:52 PM
> Subject: Re: [j-nsp] PIM SM RP issue
> 
> Hi Phil,
> 
> Could you share some additional info? This certainly sounds like either a
> misconfiguration or a bug, but without additional info, it's very hard to
> diagnose.
> 
> Helpful info would include:
> 
> JUNOS version
> 
> relevant config snippets from the Juniper RP and Cisco first-hop routers
> 
> 'show pim rps extensive'
> 
> 'show pim statistics'
> 
> 'show system processes extensive'
> 
> 'show system statistics'
> 
> PFE process and traffic statistics
> 'start shell pfe network <cfeb0|fpxX>'
> 'ps'
> 'show pfe statistics traffic'
> 
> --Stacy 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp