[j-nsp] fpc2 message...

[Derick Winkworth]

GRE, IPSec, and NAT.  It is L3 mode.



________________________________
From: Nilesh Khambal <nkhambal at juniper.net>
To: Derick Winkworth <dwinkworth at att.net>; "juniper-nsp at puck.nether.net" 
<juniper-nsp at puck.nether.net>
Sent: Mon, December 20, 2010 12:09:26 PM
Subject: Re: [j-nsp] fpc2 message...

Derek,

What is the PIC being used for? Is it in L2 mode or L3 mode?

Thanks,
Nilesh.


On 12/20/10 9:18 AM, "Derick Winkworth" <dwinkworth at att.net> wrote:

> Anyone know why this would be happening with an ms-400 service-pic?   Its
> running at 2-4% CPU and less than one 1% memory utilization...
> 
> #########
> Dec 20 10:05:15  galaxy-01 fpc2 Transient flow-control asserted by MAC on
> sp-2/2 
> for 1 seconds
> Dec 20 10:05:16  galaxy-01 fpc2 Transient flow-control asserted by MAC on
> sp-2/2 
> for 2 seconds
> Dec 20 10:05:17  galaxy-01 fpc2 Prolonged flow-control asserted by MAC on
> sp-2/2
> Dec 20 10:05:20  galaxy-01 fpc2 MAC flow-control cleared on sp-2/2
> #########
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp