[j-nsp] fpc2 message...

[Alex]

Hi there,
How do you measure CPU? Is it FPC CPU or MS-PIC CPU?
"show services service-set summary" will show you the MS-PIC CPU per 
service-set and my guess it could be very different from FPC CPU in "show 
chassis fpc".
HTH
Regards
Alex


----- Original Message ----- 
From: "Derick Winkworth" <dwinkworth at att.net>
To: <juniper-nsp at puck.nether.net>
Sent: Monday, December 20, 2010 7:58 PM
Subject: Re: [j-nsp] fpc2 message...


> GRE, IPSec, and NAT.  It is L3 mode.
>
>
>
> ________________________________
> From: Nilesh Khambal <nkhambal at juniper.net>
> To: Derick Winkworth <dwinkworth at att.net>; "juniper-nsp at puck.nether.net"
> <juniper-nsp at puck.nether.net>
> Sent: Mon, December 20, 2010 12:09:26 PM
> Subject: Re: [j-nsp] fpc2 message...
>
> Derek,
>
> What is the PIC being used for? Is it in L2 mode or L3 mode?
>
> Thanks,
> Nilesh.
>
>
> On 12/20/10 9:18 AM, "Derick Winkworth" <dwinkworth at att.net> wrote:
>
>> Anyone know why this would be happening with an ms-400 service-pic?   Its
>> running at 2-4% CPU and less than one 1% memory utilization...
>>
>> #########
>> Dec 20 10:05:15  galaxy-01 fpc2 Transient flow-control asserted by MAC on
>> sp-2/2
>> for 1 seconds
>> Dec 20 10:05:16  galaxy-01 fpc2 Transient flow-control asserted by MAC on
>> sp-2/2
>> for 2 seconds
>> Dec 20 10:05:17  galaxy-01 fpc2 Prolonged flow-control asserted by MAC on
>> sp-2/2
>> Dec 20 10:05:20  galaxy-01 fpc2 MAC flow-control cleared on sp-2/2
>> #########
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>