[j-nsp] Need suggestions..
Stefan Fouant
sfouant at shortestpathfirst.net
Fri Feb 5 14:16:13 EST 2010
Sorry, that last post was not intended for J-NSP... Please disregard.
Stefan Fouant, CISSP, JNCIE-M/T
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D
> -----Original Message-----
> From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net]
> Sent: Friday, February 05, 2010 2:15 PM
> To: 'Stefan Fouant'; 'Brendan Mannella'; sthaug at nethelp.no
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] Need suggestions..
>
> I wanted to add that if we want to carry Layer 2 all the way up to the
> 6509
> and terminate the Layer 3 at the core layer and that core layer is
> composed
> of 2 6509s for redundancy (see diagram), you are still going to need to
> do
> VRRP.
>
> If we move the Layer 3 termination to the Aggregation layer, we don't
> need
> VRRP so long as you always use 4200s in a Virtual Chassis
> configuration. In
> this mode, we do VC-LAG (Virtual-Chassis LAG) between the two 4200 VC
> Members and the access layer device. So this is probably the best
> approach
> since we don't have the wiggle room to do VRRP (readdressing, etc.)...
>
> Stefan Fouant, CISSP, JNCIE-M/T
> www.shortestpathfirst.net
> GPG Key ID: 0xB5E3803D
>
>
> > -----Original Message-----
> > From: Stefan Fouant [mailto:sfouant at shortestpathfirst.net]
> > Sent: Friday, February 05, 2010 2:04 PM
> > To: 'Brendan Mannella'; 'sthaug at nethelp.no'
> > Cc: 'juniper-nsp at puck.nether.net'
> > Subject: RE: [j-nsp] Need suggestions..
> >
> > Yes, you should be able to use third party memory.
> >
> > Just make sure to swap it out if you end up RMA'ing a box ;)
> >
> > Stefan Fouant, CISSP, JNCIE-M/T
> > www.shortestpathfirst.net
> > GPG Key ID: 0xB5E3803D
> >
> > > -----Original Message-----
> > > From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> > > bounces at puck.nether.net] On Behalf Of Brendan Mannella
> > > Sent: Friday, February 05, 2010 12:49 PM
> > > To: sthaug at nethelp.no
> > > Cc: juniper-nsp at puck.nether.net
> > > Subject: Re: [j-nsp] Need suggestions..
> > >
> > > Is there a third party alternitive?
> > >
> > > Brendan Mannella, CEO
> > > TeraSwitch Networks Inc.
> > > Office: 412.224.4333 x303
> > > Mobile: 412.592.7848
> > > Efax: 412.202.7094
> > >
> > > On Feb 5, 2010, at 12:47 PM, sthaug at nethelp.no wrote:
> > >
> > > >> Yes, if I am in "memory upgrade mode", I might as well upgrade
> the
> > > >> CFEB as well.
> > > >> So, if anyone has the PN#, I would appreciate knowing it also.
> > > >
> > > > MEM-FEB-256-S
> > > > Optional M10i,M7i Forwarding Engine Board (FEB) Memory Upgrade:
> > 256
> > > > MB DRAM Module
> > > >
> > > > Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list