[j-nsp] CompactFlash Card

[HahnC at t-systems.com]

Hi there

please take a look at
http://juniper.cluepon.net/index.php/Replacing/upgrading_the_CF_on_a_RE

>
>I've seen somewhere on Juniper's website that the maximum 
>allowed CF on M7i is 1GB.

I've upgraded a RE5.0 by myself and have a SanDisk SDCJF-2048 working.
It could be possible that fact that you try to use an Ultra CF card
could be the problem. Could be that this is an issue with CF controller,
try to use standard CF instead.

==========================8<==========================================
Routing Engine   REV 09   740-009459   xxxxxxxxxx        RE-5.0
  ad0    1953 MB  SanDisk SDCFJ-2048   004121E1108J2007  Compact Flash
  ad1   38154 MB  ST940818AM           xxxxxxxx          Hard Disk
==========================8<==========================================

cheers,
Christian

>
>
>Regards,
>V.Vasilev
>
>
>On Thu, Feb 18, 2010 at 8:51 AM, Erol KAHRAMAN 
><erol.kahraman at gmail.com>wrote:
>
>> Hello,
>>
>> I bought a compactflash card (SanDisk Ultra 2GB) and planned 
>to use it 
>> for my M7i box. However, when i insert it to my pcmci 
>interface i saw 
>> that it is not in my storage device list. In my log file i 
>get the following lines:
>>
>> /kernel: ad3: Device does not support APM
>> /kernel: ad3: 1918MB <SanDisk SDCFH-002G HDX 5.00> at 
>ata2-master PIO4
>>
>> I also try to prepare CF disk as a bootable media from my linux box.
>>
>> dd if=/dev/zero of=/dev/sdd1 bs=512 count=1024 dd 
>> if=install-media-10.0R2.10-domestic of=/dev/sdd1 bs=64k
>>
>> After rebooting my router nothing happened.
>>
>> What could be the problem? Is there a way to use my CF card 
>as storage 
>> device in my router?
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/juniper-nsp
>