[j-nsp] CompactFlash Card

[Erol KAHRAMAN]

Thank you for link. But there is information about how to replace CF on 
RE, and minimum requirements for working configuration.
I also suspect about my ULTRA CF card, but i saw some working examples 
in that e-mail group.

===================

I have successfully done this on RE-400s on M7i's.

I used Sandisk 2GB Ultra II 15MB/s CFs. I believe the actual part number is
SDCFH-002G-A11.

===================


HahnC at t-systems.com wrote On 18-02-2010 13:24:
> Hi there
>
> please take a look at
> http://juniper.cluepon.net/index.php/Replacing/upgrading_the_CF_on_a_RE
>
>    
>> I've seen somewhere on Juniper's website that the maximum
>> allowed CF on M7i is 1GB.
>>      
> I've upgraded a RE5.0 by myself and have a SanDisk SDCJF-2048 working.
> It could be possible that fact that you try to use an Ultra CF card
> could be the problem. Could be that this is an issue with CF controller,
> try to use standard CF instead.
>
> ==========================8<==========================================
> Routing Engine   REV 09   740-009459   xxxxxxxxxx        RE-5.0
>    ad0    1953 MB  SanDisk SDCFJ-2048   004121E1108J2007  Compact Flash
>    ad1   38154 MB  ST940818AM           xxxxxxxx          Hard Disk
> ==========================8<==========================================
>
> cheers,
> Christian
>
>    
>>
>> Regards,
>> V.Vasilev
>>
>>
>> On Thu, Feb 18, 2010 at 8:51 AM, Erol KAHRAMAN
>> <erol.kahraman at gmail.com>wrote:
>>
>>      
>>> Hello,
>>>
>>> I bought a compactflash card (SanDisk Ultra 2GB) and planned
>>>        
>> to use it
>>      
>>> for my M7i box. However, when i insert it to my pcmci
>>>        
>> interface i saw
>>      
>>> that it is not in my storage device list. In my log file i
>>>        
>> get the following lines:
>>      
>>> /kernel: ad3: Device does not support APM
>>> /kernel: ad3: 1918MB<SanDisk SDCFH-002G HDX 5.00>  at
>>>        
>> ata2-master PIO4
>>      
>>> I also try to prepare CF disk as a bootable media from my linux box.
>>>
>>> dd if=/dev/zero of=/dev/sdd1 bs=512 count=1024 dd
>>> if=install-media-10.0R2.10-domestic of=/dev/sdd1 bs=64k
>>>
>>> After rebooting my router nothing happened.
>>>
>>> What could be the problem? Is there a way to use my CF card
>>>        
>> as storage
>>      
>>> device in my router?
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>>        
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>